Teak Folding Coffee Table by Poul Volther for Frem Rojle
US$1,800.00 Denmark, 1960sPaul Volther designed this teak coffee table for the Danish company Frem Rojle in 1956. The hinged top folds over to create a demilune table perfect when a smaller footprint is desired.MeasurementsHeight: 22.5"Diameter: 47.25SpecificationsMaterials/Techniques: Brass, Teak
Read More
White Ceramic Table Lamp by Palshus, Denmark
US$1,650.00 Denmark, 1950sThis Mid-Century ceramic table lamp features a long tapering neck emerging from an incised base, with a glossy white translucent glaze over a warm taupe clay. It measures 29 inches to the top of the finial and is signed PLS DL 26/1 Palshus, Denmark.MeasurementsHeight: 29"Diameter: 7.5"SpecificationsMaterials/Techniques: Ceramic
Read More
Italian Tole and Wrought Iron Lemon Tree Sculpture
US$1,195.00 Italy, 1950sThis tole sculpture from Italy models a whimsical lemon tree. Rising from a five-legged base the wrought iron trunk spreads into multiple branches covered in green leaves and bright yellow lemons.Italian tole trees such as this from the 1950s are increasingly hard to find.MeasurementsHeight: 64.25"Width: 29"Depth: 11"SpecificationsMaterials/Techniques: Metal
Read More
Rosewood and Mahogany Side Table by Edward Wormley for Dunbar
US$2,900.00 United States, circa 1958Designed by Edward Wormley for Dunbar in the late 1950s, this lovely square side table sets a deeply grained rosewood top into a mahogany frame with curved edges and gracefully shaped legs.MeasurementsHeight: 21.75"Width: 31"Depth: 31"SpecificationsMaterials/Techniques:Mahogany, Rosewood
Read More
Plexiglas and Chrome Dining Table by Vladimir Kagan
US$4,800.00 United States, 1970sVladimir Kagan began his experiments with plexiglas in the late 1960s. Produced in the early 1970s, this table creates a visual illusion, at once strong of line and almost invisible. Two opposing arcs of Plexiglas are joined along one edge by three bold chrome-tapped rivets. Floating above, a deeply beveled round glass top adds to the magic....
Read More
Marble and Chrome Oval Conference or Dining Table by Florence Knoll
US$4,800.00 United States, 2000sDesigned by Florence Knoll in 1961, this oval conference table works beautifully for dining. Knoll’s classic four-star chrome-plated steel pedestal base supports a white Carrara marble top.MeasurementsHeight: 28"Width: 78"Depth: 47.75"SpecificationsMaterials/Techniques: Plated Steel, Carrara Marble
Read More
Leather and Chrome Cinema Chairs by Gunilla Allard
US$1,975.00 Sweden, Mid-1990sGunilla Allard’s, 1994, cinema chair for Lammhults offers deep comfort in an elegantly minimal design. The chrome-plated tubular steel frame features leather-covered armrests; the ample cushioning is snugly upholstered in soft black leather. Two chairs are available.MeasurementsHeight: 30"Width: 22"Depth: 28"Seat height: 17"SpecificationsMaterials/Techniques: Polished Chrome, Leather
Read More
Small Walnut Sideboard with White Marble Top and Leather Panels by Paul McCobb
US$4,800.00 United States, 1950sThis walnut sideboard for H. Sacks & Sons of Massachusetts shows Paul McCobb’s exacting selection of materials and attention to detail. An inset top of white marble sits above four small drawers with aluminium pulls. A pair of folding doors with inlaid black leather panels open to reveal an interior fitted with five additional drawers whose position...
Read More
Large 1970s Driftwood Coffee Table
US$4,800.00 United States, 1970sCreated in the 1970s out of a single piece of redwood driftwood, this long and low coffee table contrasts the natural patina of the organic form with a planed and polished top that showcases the beautifully figured grain.MeasurementsHeight: 13"Width: 79"Depth: 28"SpecificationsMaterials/Techniques: Driftwood
Read More
Danish Adjustable Teak High-Back Lounge Chair
US$3,600.00 Denmark, 1960sMade in Denmark in the 1960s, this high-back teak-framed lounge chair features adjustable dowels that can be set in different positions, moving the seat forward and reclining the backrest. The chair has been upholstered in a grey chenille.MeasurementsHeight: 39"Width: 26"Depth: 41"Seat height: 20"SpecificationsMaterials/Techniques: Teak, Upholstery
Read More
Teak Dining Table with Extensions by Niels Møller
US$4,800.00 Denmark, 1950sDesigned by Niels Møller, this Danish modern extension table is notable for its beautifully tapered lines and the warmth of the teak. Two concealed leaves easily slide out allow ten persons to dine comfortably.Each extension is 15.5 inches.MeasurementsHeight: 28.75"Width: 70.5"Depth: 40.5"SpecificationsMaterials/Techniques: Teak
Read More
Walnut and Birch Magazine Tree by Edward Wormley for Dunbar
US$6,400.00 United States, Early 1950sEdward Wormley designed this multi-tiered magazine tree, model number 4765, for Dunbar in the late 1940s. The trunk and limbs are constructed in birch, while the five shelves feature a lovely sap-grain walnut.MeasurementsHeight: 24.5"Width: 28"Depth: 15.75"SpecificationsMaterials/Techniques: Birch, Walnut
Read More
High-Back Lounge Chair by Harvey Probber
US$2,800.00 United States, Late 1960sSet on a walnut plinth base, this comfortable lounge chair, with its slender armrests, wide seat, and high back, has the clean lines of Classic Harvey Probber. The chair has been upholstered in a soft chenille.MeasurementsHeight: 37.5"Width: 28.5"Depth: 34"Seat Height: 16"SpecificationsMaterials/Techniques: Chenille, Walnut
Read More
Cart cart 0
You have successfully subscribed!