The Luxify Motorbikes

Show Sidebar

Excelsior 1914 Big Single 810cc 1 cyl sv 2801

Posted by Yesterdays

12 May, 2020

Excelsior 1914 Big Single 810cc 1 cyl sv 2801


The Coventry firm of Bayliss, Thomas & Co. was established in 1874 so its roots dated from the solid-tyre bicycle era.
Early manufacturers in both the motorcycle and the car fields, they were an established firm well before the Great War.
For model year 1914 three types of motorcycle were available, all sturdy built singles in 499 cc, 650 cc and 810 cc capacities.
The 810 cc single with bore x stroke of 96 x 112 mm was the biggest available single cylinder model of its time; perhaps the biggest single ever?
The BS was meant for sidecar work.
The machine has quality fittings such as Brampton Biflex forks, Bosch magneto, Senspray carburettor and Jardine gearbox.
Note the typical lubrication system: oil is led to a lug cast between the valves, from where a hole is drilled into the cylinder on a level with the gudgeon pin when at the bottom of its stroke.
Thus the oil reaches the small end bearing through the hollow gudgeon pin.
The lug is also drilled down to the crankshaft bearing, from which it is lead by ducts to all the main bearings.
The company claimed that the big single's engine was so flexible that the machine could be ridden in circles on an ordinary roadway at a speed of 3 to 4 mph on full compression without the slightest sign of thumping.
This practical veteran has a two-speed gearbox with foot clutch control.
A nice detail is the authentic Brooks saddle.
This Dutch-registered sturdy and practical veteran has been restored some time ago.
She comes complete with acetylene lighting system with Lucas front lamp and bulb horn.

Cart cart 0
You have successfully subscribed!