The Luxify Motorbikes

Show Sidebar

FN 1923 four 750cc 4 cyl ioe 2709

Posted by Yesterdays

12 May, 2020

FN 1923 four 750cc 4 cyl ioe 2709


To many enthusiasts the FN four has always been one of the most appealing machines of veteran and vintage times. Its production ran from 1905 till 1926.
The earliest type had a 362 cc engine with automatic overhead inlet valves and side exhaust valves.
The machine was single geared, had shaft drive and the top speed was about 60 km/hour.
The FN four was an immediate success and found customers all over the world; FN sold its machines in more than 40 countries.
It found many customers in the U.S.A. and made Americans interested in the four cylinder concept: Percy Pierce purchased a 1908 model on one of his trips to Europe and the FN became a point of reference for the first Pierce Four in 1909.
The design was developed to 493 cc and the machine got a proper clutch and gearbox in the years before the War.
In 1914 the engine was completely redesigned: it grew to 748 cc with side valves on opposite sides of the cylinder, the so-called T-head configuration.
The machine had a sturdy clutch and a three speed gearbox.
Soon after the war the production was resumed with a slightly updated 1914 model.
In the early twenties the T- configuration was changed to overhead inlet valve configuration.
In the autumn of 1923 the model M 50 was marketed: the four got chain drive and the flywheel was enclosed by the crankcase, to name a few new features.
But the days of the FN four were almost over now: the new and successful 348 cc OHV single M 60 was much cheaper and almost as fast.
At the end of 1926 FN four production came to an end.

This sturdy FN has been restored some time ago and is in overall good condition.

Cart cart 0
You have successfully subscribed!